News

SYSTEM
⚙️ New miner BzMiner added

MINERS
⛏ BzMiner v11.1.0  ERG+KASPA IS WORKING NOW
* New coin: Zil (0% dev fee)
* Triple Mining with Zil + any dual combo (Using flexpool's ZMP protocol)
* Dual Mining with Zil + any algo (Using flexpool's ZMP protocol)
* Partial Chinese translation
* Added lang option (en or cn)
* Added force_algo2 option
* Renamed column option miner mh to miner_hr
* Renamed column option pool mh to pool_hr
* Fixed duplicate shares on large rigs
* Simplified readme
* Added readme_cn.txt for chinese
* (minor) AMD Kaspa improvements
⛏ lolMiner v1.57
* An other performance improvement of Flux mining on Ampere based GPUs (1.5 - 3.5% depending on model and clocks)
* Fixed a bug causing some Ergo pools to disconnect the miner frequently (Introduced with 1.56 :/ )
⛏ Team Red Miner v0.10.3
Maintenance release improving autolykos2 with pad prebuild and dual zil mining in general, especially when running R-mode.
* Added next height pad prebuild for Ergo/Autolykos2 to raise effective hashrate over time.
* Better execution of R/B/C modes for ethash with dual zil mining.
* Added R-mode zil cache support with --eth_dag_cache=0.
* Added argument --eth_no_job_logs to suppress pool job logging.
* Fixed some issues with pools using miningcore, mainly ergo and verthash pools.

MINERS
⛏ lolMiner v1.56
* Major performance increase for Flux mining on Nvidia Ampere GPUs
* Major performance increase for Beam mining on Nvidia Ampere GPUs
* Mining Flux and Beam on all Nvidia GPUs now uses Cuda instead of OpenCL
* Slight performance improvements for Flux mining on AMD RX 500, RX 5000 and RX 6000 (about 0.2 it/s)
* Mining any Equihash based coin (Flux, BTG, Aion, ...) now supports extra nonce subscription via stratum (e.g. for better profit switching pool experience)
* Added option --no-cl to disable detection of OpenCL powered GPUs (fixes a crash on some rigs where the Nvidia OpenCL driver crashes - happens mostly when having a rig with many GPUs)
* Disabled DAG checking for ETC mining on 4G AMD GPUs, because this was always failing (investigating to bring it back asap)
* Nvidia LHR cards will no longer run the LHR unlock when not mining Et(c)hash or Ergo - this will prevent them from crashing on some other algorithms

SYSTEM
⚙️ Nicehash pools updated with new links. Also added some other pools.

MINERS
⛏ miniZ v1.9z2
* Performance improvements for some AMD GPUs, on FLUX.
Major improvement for the RX 6800 XT
* Fixed issue interfering with Zano mining.
⛏ NanoMiner v3.7.1
* Automatic switch to ETC is off by default.
* Added the option walletEtc to specify ETC wallet after switching.
⛏ SRBMiner-Multi v1.0.7
* Added algorithm pufferfish2bmb for GPU mining BMB/Bamboo on RDNA2 cards, fee 1%
* Small performance increase on pufferfish2bmb algorithm for CPUs.
* Reduced devfee for autolykos2 for mining Ergo to 1%.

MINERS
⛏ lolMiner v1.55
* Significantly improved Flux mining performance on AMD RX 5000 (+10% on 5700) and AMD RX 6000 based GPUs (+15-22%)
* Mining Flux, Beam, Equihash 144/5 and Equihash 192/7 will now display the iteration/s (it / s) for easier OC tuning and the pool sol/s calculated from submitted and accepted shares.
* Added DAG check and repair function for Ethereum Classic mining up to epoch 300
* Added ETH / ETC + Kaspa code for Nvidia Pascal based GPUs.
* Added option to mix different Ethash style algorithms when using the fail-over pool function. To use this you now can use eth:, etc: and ubiq: as a prefix for your fail-over pool address to indicate this pool uses a different algorithm then the one configured initially. This will allow to automatically switch from Ethash to an Etchash pool when "the merge" happens as one can configure for normal Ethash mining and configure one of the fail-over pools as Etchash, so when the primary pool gets disconnected or rejects the authorization (these two are expected behavior for Eth pools after the merge), then the miner can switch to a fail-over e.g. configured to mine Etchash.
Note: when using this feature with prefixes like tls:// or ssl://, then put the new prefix after the prefix for the communication layer. So tls://etc: is valid, while etc:tls:// is not.*
* Fixed a bug that might cause the miner to crash when an Ergo pool connection needs to reconnect.
* Fixed a bug that can cause random invalid shared when mining Kaspa on AMD GPUs.
⛏ NBMiner v42.3
* Added support for NiceHash ETC pool
⛏ SRBMiner-Multi v1.0.6
* Added algorithm pufferfish2bmb for CPU mining BMB/Bamboo coin, fee 1%; 
* Algorithm xdag is now compatible with the new XDAGj network protocol
⛏ NanoMiner v3.7.0
* Added automatic switch with config option switchToEtc from ETH to ETC when ETH moves to PoS

MINERS
⛏ T-Rex v0.26.5
* Make LHR unlocker compatible with older drivers (e.g. 470+ on Linux)
⛏ lolMiner v1.54
* Fixed a bug sometimes causing duplicate send shares in Kaspa dual mining.
* Fixed a bug "Received a defect stratum message: conversion of data to type "b" failed" on new Kaspa pools and the solo mining adapters.
* Fixed a bug causing --dualworker not to work right with Kaspa dual mining.
⛏ SRBMiner-Multi v1.0.4
Improved performance on all dual mineable algorithms for RDNA2 GPUs
⛏ WildRig-Multi v0.32.2
* Implemented support of socks5 proxy, parameter --proxy.
* Improved curvehash up to 40% on RDNA/RDNA2 and up to x2 times on NVIDIA, Polaris/Vega not tested, can be better too.
⛏ NanoMiner v3.6.8
* Added support octopus algorithm for mining CFX/Conflux on AMD RDNA/RDNA2 GPUs RX 5xxx/6xxx
* Fixed nanominer crashes
⛏ CPUminer-Opt-JayDDee v3.20.2
* Bit rotation optimizations to Blake256, Blake512, Blake2b, Blake2s & Lyra2-blake2b for SSE2 & AVX2.
* Removed old unused yescrypt library and other unused code